Printing your own scenery is one of the most rewarding parts of the tabletop hobby: a table full of ruined towers, barricades and dungeon rooms costs a fraction of the shop-bought equivalent, and you decide exactly how it looks. This guide covers what you need, the settings that work for terrain on a regular FDM printer, and how to go from a pile of printed parts to a painted table.
What you need
- An FDM (filament) 3D printer. Terrain is large and simple, which suits FDM very well. You do not need a resin printer.
- PLA filament. It is cheap, easy to print and good enough for scenery. Grey is a practical colour because it is easy to prime and paint.
- A slicer such as Cura, PrusaSlicer or Bambu Studio to turn the STL files into instructions for your printer.
- Glue (cyanoacrylate or a plastic-friendly adhesive), fine sandpaper and a craft knife for assembly.
Start with files made for printing
The biggest difference between a frustrating print and a good one is the model. Look for terrain that is designed for FDM: split into sections that fit the print bed, with flat bases and no need for supports. Most of the buildings in our ruined buildings collection are designed this way, and each product page says what to expect.
If you have never printed terrain, try the free Ruined Shack first. It is a quick way to check your settings before committing to a large tower.
Slicer settings that work for terrain
- Nozzle and layer height: a standard 0.4 mm nozzle with 0.2 mm layers is a good balance. Drop to 0.12 to 0.16 mm for pieces with fine stonework if you are happy to wait longer.
- Walls: 2 to 3 perimeters are plenty. Terrain does not need to be structural.
- Infill: 10 to 15 percent saves a lot of filament and time. Increase it only for tall, thin towers that need weight and stability.
- Supports: leave them off for models marked as support-free and print each part in the orientation supplied.
- Bed adhesion: add a brim to tall or narrow parts so they do not lift or tip during the print.
- Speed: slow the outer walls down a little. Surface detail looks noticeably crisper.
Scale: how big should it be?
Our terrain is modelled for 28 mm miniatures by default, the most common scale for fantasy skirmish games and tabletop RPGs. For another scale, divide your target scale by 28 and scale the model by that percentage in your slicer. For example, a 32 mm game needs roughly 114 percent. Remember that doors, stairs and windows scale with the model, so check that your miniatures' bases still fit.
Assembly
- Do a dry fit first, without glue, to check how the parts go together.
- Remove stringing and print blemishes with a craft knife and a little light sanding.
- Glue the parts in place. For pieces you want to store flat or play inside, leave the upper floors removable instead of gluing them.
- Fill visible gaps with modelling putty and smooth it once it has dried.
Painting in four steps
- Prime: a spray primer in black or grey gives paint something to grip and makes details readable.
- Base coat: paint large surfaces in mid-tone colours: stone grey, wood brown, rusty metal.
- Wash: a dark wash (brown or black) runs into the recesses and brings out the detail immediately.
- Drybrush: wipe most of the paint off a brush and lightly brush a lighter colour across the raised edges.
That is enough for a convincing table. Moss, soot and rust effects can be added later as you gain confidence.
Build a table, not just a building
A single tower looks good, but a table needs variety and height. Combine larger set pieces with terrain props and scatter for cover and atmosphere, and add monsters and character miniatures to populate it. If you enjoy modular dungeons, see our Fix-Click tiles.
Want to sell prints of what you make? Take a look at the commercial license.
